Canton Appliance Repair
Book a repairRepair record › Samsung dryers
We've repaired 15 Samsung dryers for this problem between September 2018 and October 2026. This is what was actually wrong, counted from our own job records.
Of the 15 Samsung dryers we've repaired for "will not start", the most common cause was: idler pulley worn out (6 jobs, 40%), followed by drive belt broken (2) and drive motor failed (2). The parts we replaced most often were idler pulley, heating element, drive belt.
Seen once each: drum roller worn out, wiring harness damaged, loose power outlet connection, heating element burned out, control panel board failed.
One repair can replace more than one part, so these add up to more than the number of jobs.
Cleaned lint and rollers and replaced right rear roller.
Drum roller worn out · model DV48H7400EW/A2-01 · October 2026Replaced belt, idler pulley and one drum support.
Drive belt broken · model DV52J8700EP/A2 · August 2021Replaced the user interface board.
Control panel board failed · July 2021Replaced the idler pulley.
Idler pulley worn out · July 2021Replaced motor and heating element.
Drive motor failed · model DV42H5200EP/A3 · May 2021Each job on this page is a completed service call from our own records. After every repair, the technician notes the complaint, what was found and what was replaced. We group jobs by brand, appliance and complaint, then count the causes. Customer names, addresses and prices are never published. Last updated November 2026.
Compiled by Canton Appliance Repair from our technicians' completed service calls in Stark County.
The full record by brand, appliance and town is on our repair record page.
Book online any time, or call or text (330) 915-7222.