Canton Appliance Repair
Book a repairRepair record › Kenmore dryers
We've repaired 43 Kenmore dryers for this problem between July 2019 and October 2026. This is what was actually wrong, counted from our own job records.
Of the 43 Kenmore dryers we've repaired for "not heating", the most common cause was: heating element burned out (14 jobs, 33%), followed by gas valve coils failed (7) and thermal fuse blown (5). The parts we replaced most often were heating element, gas valve coils, thermal fuse.
Seen once each: high limit thermostat failed, timer failed, burnt power cord terminal block, worn drum bearing, faulty power outlet, loose wiring connection, household power supply problem.
One repair can replace more than one part, so these add up to more than the number of jobs.
Replaced restrictive flexible vent duct with rigid duct and replaced the high limit thermostat.
Clogged dryer vent · model 11096291110 · September 2026Replaced high limit and cycling thermostat and reinstalled blower cover correctly.
High limit thermostat failed · September 2026Replaced the thermal fuse and cycling thermostat.
Thermal fuse blown · September 2026Replaced gas valve coils, belt, idler pulley and rollers.
Gas valve coils failed · August 2026Cleaned vent, replaced gas valve coils and cleaned baffles.
Gas valve coils failed · August 2026Each job on this page is a completed service call from our own records. After every repair, the technician notes the complaint, what was found and what was replaced. We group jobs by brand, appliance and complaint, then count the causes. Customer names, addresses and prices are never published. Last updated November 2026.
Compiled by Canton Appliance Repair from our technicians' completed service calls in Stark County.
The full record by brand, appliance and town is on our repair record page.
Book online any time, or call or text (330) 915-7222.