Canton Appliance Repair
Book a repairRepair record › Kenmore washers
We've repaired 21 Kenmore washers for this problem between May 2019 and November 2021. This is what was actually wrong, counted from our own job records.
Of the 21 Kenmore washers we've repaired for "not draining", the most common cause was: drain pump failed (12 jobs, 57%), followed by lid switch failed (5) and drain filter clogged (2). The parts we replaced most often were drain pump, lid switch, drive hub.
Seen once each: drive hub stripped, drain pump clogged with debris.
One repair can replace more than one part, so these add up to more than the number of jobs.
Replaced the lid switch.
Lid switch failed · November 2021Replaced the drain pump.
Drain pump failed · September 2021Replaced the lid switch.
Lid switch failed · July 2021Replaced the drain pump.
Drain pump failed · June 2021Replaced lid switch.
Lid switch failed · May 2021Each job on this page is a completed service call from our own records. After every repair, the technician notes the complaint, what was found and what was replaced. We group jobs by brand, appliance and complaint, then count the causes. Customer names, addresses and prices are never published. Last updated November 2026.
Compiled by Canton Appliance Repair from our technicians' completed service calls in Stark County.
The full record by brand, appliance and town is on our repair record page.
Book online any time, or call or text (330) 915-7222.