Canton Appliance Repair
Book a repairRepair record › LG dryers
We've repaired 21 LG dryers for this problem between March 2019 and September 2026. This is what was actually wrong, counted from our own job records.
Of the 21 LG dryers we've repaired for "not heating", the most common cause was: thermal fuse blown (4 jobs, 19%), followed by heating element burned out (4) and dryer vent clogged (3). The parts we replaced most often were heating element, thermal fuse, igniter.
Seen once each: power terminal block burned, no gas supply, fuse blown, main control board failed.
One repair can replace more than one part, so these add up to more than the number of jobs.
Replaced power cord and terminal block kit and cleaned lint.
Power terminal block burned · model DLE7400WE · September 2026Replaced the heating element.
Heating element burned out · model DLEX2501W · November 2025Replaced the igniter.
Gas igniter failed · model DLG7101W · October 2021Replaced heating element assembly.
Heating element burned out · model DLE3050W · July 2021Installed new heat element assembly with high limit fuse and cycling thermostat.
Thermal fuse blown · model DLEX2655V · March 2021Each job on this page is a completed service call from our own records. After every repair, the technician notes the complaint, what was found and what was replaced. We group jobs by brand, appliance and complaint, then count the causes. Customer names, addresses and prices are never published. Last updated November 2026.
Compiled by Canton Appliance Repair from our technicians' completed service calls in Stark County.
The full record by brand, appliance and town is on our repair record page.
Book online any time, or call or text (330) 915-7222.