Canton Appliance Repair
Book a repairRepair record › Speed Queen dryers
We've repaired 20 Speed Queen dryers for this problem between February 2019 and October 2026. This is what was actually wrong, counted from our own job records.
Of the 20 Speed Queen dryers we've repaired for "not heating", the most common cause was: heating element burned out (5 jobs, 25%), followed by gas valve coils failed (3) and timer failed (2). The parts we replaced most often were gas valve coils, heating element, cycling thermostat.
Seen once each: gas supply not connected, no power at outlet, heater wiring burned, thermal fuse blown, heat selector knob missing, dryer vent clogged, control board failed, high limit thermostat failed.
One repair can replace more than one part, so these add up to more than the number of jobs.
Replaced heater kit including element, thermal fuse and limit thermostat and confirmed normal heating.
Heating element burned out · model ADEE9RGS175TW01 · October 2026Replaced the high limit thermostat and cycling thermostat.
High limit thermostat failed · model ADE3SRGS177TW01 · October 2026Replaced the heater connection, cleaned lint and replaced the vent elbow.
Heater wiring burned · model ADEE9RYS177TW01 · August 2026Replaced the heat element.
Heating element burned out · model ADE3SRGS173TW01 · August 2026Replaced thermal fuse and cycling thermostat.
Thermal fuse blown · model ADE3LRGS171TW01 · August 2026Each job on this page is a completed service call from our own records. After every repair, the technician notes the complaint, what was found and what was replaced. We group jobs by brand, appliance and complaint, then count the causes. Customer names, addresses and prices are never published. Last updated November 2026.
Compiled by Canton Appliance Repair from our technicians' completed service calls in Stark County.
The full record by brand, appliance and town is on our repair record page.
Book online any time, or call or text (330) 915-7222.