Canton Appliance Repair
Book a repairRepair record › Whirlpool dishwashers
We've repaired 12 Whirlpool dishwashers for this problem between July 2019 and June 2021. This is what was actually wrong, counted from our own job records.
Of the 12 Whirlpool dishwashers we've repaired for "not draining", the most common cause was: drain hose clogged (4 jobs, 33%), followed by drain pump failed (3). The parts we replaced most often were drain pump, food chopper screen, soap dispenser.
Seen once each: drain clogged, drain pump blocked by debris, no fault found, drain hose installed incorrectly, float switch jammed by debris.
One repair can replace more than one part, so these add up to more than the number of jobs.
Replaced drain pump, food chopper screen assembly and soap dispenser.
Drain pump failed · model GU2500XTPQ0 · December 2020Installed a new drain pump and cleaned out the drain line.
Drain pump failed · model GU1200XTKQ0 · December 2020Extended and ran the drain hose to the garbage disposer.
Drain hose installed incorrectly · model WDT710PAHW1 · October 2020Each job on this page is a completed service call from our own records. After every repair, the technician notes the complaint, what was found and what was replaced. We group jobs by brand, appliance and complaint, then count the causes. Customer names, addresses and prices are never published. Last updated November 2026.
Compiled by Canton Appliance Repair from our technicians' completed service calls in Stark County.
The full record by brand, appliance and town is on our repair record page.
Book online any time, or call or text (330) 915-7222.