Canton Appliance Repair
Book a repairRepair record › Whirlpool dryers
We've repaired 22 Whirlpool dryers for this problem between April 2019 and September 2026. This is what was actually wrong, counted from our own job records.
Of the 22 Whirlpool dryers we've repaired for "will not start", the most common cause was: thermal fuse blown (6 jobs, 27%), followed by door switch failed (2) and main control board failed (2). The parts we replaced most often were thermal fuse, drive belt, high limit thermal fuse.
Seen once each: start switch failed, power outlet failed, drive belt broken, door switch loose, blower clogged with debris, household electrical problem, drive belt worn, circuit breaker tripped.
One repair can replace more than one part, so these add up to more than the number of jobs.
Replaced push to start button assembly and reconnected vent.
Start switch failed · model CEM2760KQ3 · September 2026Installed maintenance kit, motor pulley and blower wheel and cleaned lint.
Idler pulley broken · model WGD70HEBW1 · July 2026Replaced safety switch, idler pulley and control board.
Main control board failed · model WED95HEXW0 · October 2021Replaced the thermal fuse.
Thermal fuse blown · model WET3300XQ1 · September 2021Replaced door switch.
Door switch failed · model WED8500BW0 · September 2021Each job on this page is a completed service call from our own records. After every repair, the technician notes the complaint, what was found and what was replaced. We group jobs by brand, appliance and complaint, then count the causes. Customer names, addresses and prices are never published. Last updated November 2026.
Compiled by Canton Appliance Repair from our technicians' completed service calls in Stark County.
The full record by brand, appliance and town is on our repair record page.
Book online any time, or call or text (330) 915-7222.